Table of Contents
Advertisement
Parameter
CPU Common Options
Performance
Prefetcher settings
Core Watchdog
RedirectForReturnDis
Platform First Error Handling
Core Performance Boost
Global C-State Control
Power Supply Idle Control
SEV ASID Count
SEV-ES ASID Space Limit
Control
Streaming Stores Control
Local APIC Mode
ACPI_CST C1 Declaration
MCA error thresh enable
SMU and PSP Debug Mode
Xtrig7 Workaround
PPIN Opt-in
SNP Memory (RMP Table)
Coverage
SMEE
BIOS Setup
Description
Press [Enter] for configuration of advanced items.
Press [Enter] for configuration of advanced items.
Press [Enter] for configuration of advanced items.
From a workaround for GCC/C000005 issue for XV Core on CZ A0,
setting MSRC001_1029 Decode Configuration (DE_CFG) bit 14
[DecfgNoRdrctForReturns] to 1.
Options available: Auto , 1, 0. Default setting is Auto.
Enable/Disable PFEH, cloak individual banks, and mask deferred error
interrupts from each bank.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Enable/Disable the Core Performance Boost function.
Options available: Auto, Disabled. Default setting is Auto.
Controls the IO based C-state generation and DF C-states.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Configures the Power Supply Idle Control.
Options available: Auto, Low Current Idle, Typical Current Idle. Default
setting is Auto.
Specifies the maximum valid ASID, which affects the maximum system
physical address space.
Options available: Auto, 253 ASIDs, 509 ASIDs. Default setting is Auto.
Space limit control for SEV-ES ASIDs.
Options available: Auto, Manual. Default setting is Auto.
Enable/Disable the Streaming Stores functionality.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Sets the Local APIC Mode.
Options available: Auto, xAPIC, x2APIC. Default setting is Auto.
Determines whether or not to declare the C1 state to the OS..
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Enable MCA error thresholding.
Options available: Auto, False, True. Default setting is Auto.
When this option is enabled, specific uncorrected errors detected by the
PSP FW or SMU FW will hand and not reset the system.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Options available: Auto, No Workaround, Bronze Workaround, Sliver
Workaround. Default setting is Auto.
Enable/Disable the PPIN feature.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Enabled: Enter system memory is covered.
Options available: Disabled, Enabled, Custom, Auto.
Default setting is Auto.
Controls the Secure Memory Encryption Enable (SMEE) function.
Options available: Disable, Enable, Auto. Default setting is Auto.
- 66 -
Advertisement
Table of Contents
