Gigabyte MZ32-AR1 User Manual page 23

13) FP_1 (Front Panel Header)
Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and system status indicator
on the chassis to this header according to the pin assignments below. Note the positive and negative pins
before connecting the cables.
FP_1
The front panel design may differ by chassis. A front panel module mainly consists of power switch,
reset switch, power LED, hard drive activity LED, speaker etc. When connecting your chassis front
panel module to this header, make sure the wire assignments and the pin assignments are matched
correctly.
CPU
Pin No. Definition
1 Power LED+
3 No Pin
5 Power LED-
7* HDD LED+
9* HDD LED-
11 Power Button
13 GND
15 Reset Button
17 GND
19 ID Button
21 GND
23 NMI Switch
*Note: Pin 7 & Pin 9 are reserved for Gigabyte systems.
- 23 -
1 2
23 24
Pin No. Definition
2 5V Standby
4 ID LED+
6 ID LED-
8 System Status LED+
10 System Status LED-
12 LAN1 Active LED+
14 LAN1 Link LED-
16 SMBus Data
18 SMBus Clock
20 Case Open
22 LAN2 Actve LED+
24 LAN2 Link LED-
Hardware Installation