Table of Contents
Advertisement
4/5/6/7/8/9) CPU0_FAN//SYS_FAN1/SYS_FAN2/SYS_FAN3/SYS_FAN4/SYS_FAN5
(CPU FAN/System FAN Headers)
The motherboard has one 4-pin CPU fan header (CPU_FAN), and five 4-pin (SYS_FAN) system fan headers.
Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect
it in the correct orientation (the black connector wire is the ground wire). The motherboard supports CPU
fan speed control, which requires the use of a CPU fan with fan speed control design. For optimum heat
dissipation, it is recommended that a system fan be installed inside the chassis.
SYS_FAN3
SYS_FAN4
SYS_FAN5
• Be sure to connect fan cables to the fan headers to prevent your CPU and system from
overheating. Overheating may result in damage to the CPU or the system may hang.
• These fan headers are not configuration jumper blocks. Do not place a jumper cap on the
headers.
CPU0_FAN
CPU
1
SYS_FAN1
SYS_FAN2
4
Pin No. Definition
1
2
3
4
- 21 -
4
1
GND
+12V
Sense
Speed Control
Hardware Installation
Advertisement
Table of Contents
