Select Ctcss Subchannel (00-38) - Cobra MicroTalk Professional 2-WAY RADIO Operating Instructions Manual

Cobra PR 1000 manual (4216 copy
Operation
Select Select Channels (1-15)
Channels
Channels 1-7 are shared with FRS radios.
Note
Units must be on same
channel and subchannels to
communicate.
Note
Push and hold Channel up or
down Buttons for fast channel
Turn on microTalk Professional. An audible
advance.
"tone" will indicate the unit is on and the LCD
will self-test for 3 seconds and then go to
Operational Mode.
Select channel by pressing and releasing the
6
12/4/00 4:08 PM Page 6
PRESS
UP OR DOWN
Channel button up or down.

Select CTCSS Subchannel (00-38)

The CTCSS (Continuous Tone Controlled Squelch
System) is a great convenience when you are in
an area with many radios. It acts like a gate to
transmissions from other radios. Once your radio
is set to a CTCSS code, you will only hear trans-
missions from other radios on the same channel
and the same CTCSS code.
Tu rn on the micro Talk Pro fe s s i o n a l . An audible
"to n e"will indicate the unit is on and then the
LCD will self-test for 3 seconds and then go to
O pe rational Mod e.
Select main channel by pressing the
Channel button up or down.
Operation
Select CTCSS
Subchannel
Note
CTCSS (Continuous Tone
Controlled Squelch System) is
an advanced subcoding system
that allows segmentation of a
main channel.
Note
If you push and hold the Mode
Button,the LCD display will
cycle through the different
functions.
PRESS
UP OR DOWN
Note
To return to operational mode
and not save your last setting
push and release Talk Button.
continued
7