Turning On - Cobra MicroTalk Professional 2-WAY RADIO Operating Instructions Manual

Cobra PR 1000 manual (4216 copy
Operation
Battery Install Batteries
Installation
Note
Use high quality"AA" batteries
such as alkaline, NiMH or
Ni-Cad.
Incorrect positioning can dam-
age both the batteries and the
unit.
See Accessories on page 27.
Charge ports are located on
side of unit.
Note
When batteries are low or need
( )
charging the BATT
Pull lock tab down
LOW indicator will blink.
and lift door up
Replace alkaline batteries.
(towards you) to
remove battery
cover.
2
12/4/00 4:08 PM Page 2
Insert six "AA" bat-
teries. Position bat-
teries according to
po l a ri ty marki n g s.
Turning On Your microTalk Professional
TURN KNOB
CLOCKWISE
Turn the Volume control clockwise to switch
power on. Set volume to desired level. Turn the
Volume control counter-clockwise to turn power
off.
Antenna
The radio is equipped
with a SMA female anten-
na connector and a
matching UHF antenna.
Place top of unit with
antenna on connector,
turning clockwise until
tight. You can replace this
antenna with an optional
mobile antenna when
using the radio inside a
car, or a base antenna in a
fixed location.
Operation

Turning On

Your microTalk
Professional
Note
Wh e n ever the unit is on yo u
can re ce i ve co m m u n i ca t i o n s.
Antenna
PLACE ON
CONNECTOR.
TURN
CLOCKWISE
3