How To Manage: Error Codes - Husqvarna QCE9450X User Manual

TROUBLESHOOTING
Components
Description
The lamp is burnt out.
Cleaning
Description
There is water in the appliance cavity.
The steam cooking does not work.
The steam cooking does not work.
It takes more than three minutes to empty the
water tank or the water leaks from the steam
inlet opening.
Power cut always stops cleaning. Repeat cleaning if it's interrupted by power failure.

13.2 How to manage: Error codes

When the software error occurs, the display shows error message.
In this section, you will find the list of the problems that you can handle on your own.
Code and description
C2 - the Food sensor is in the appliance cavity
during Pyrolytic Cleaning.
C3 - the door is not fully closed during Pyrolyt‐
ic Cleaning.
F111 - Food sensor is not correctly inserted in‐
to the socket.
40/48
Remedy
Replace the lamp, for details refer to "Care and
Cleaning" chapter, How to replace: Lamp.
Remedy
There is not too much water in the water tank.
There is no lime residue in the steam inlet
opening.
There is water in the water tank.
There is no lime residue in the steam inlet
opening. Clean the water tank.
Remedy
Take out the Food sensor.
Close the door.
Fully plug Food sensor into the socket.