Table of Contents
Advertisement
CHASE INSTALLATIONS
Instructions for chase installations are included with chase style ter-
mination chosen. In a multiple chase installation, be sure to provide
adequate distance between terminations to prevent smoke spillage
from one termination to another. We suggest that terminations be
separated at least 24", center to center and stacked at a vertical height
difference of 18" (see Figure 18).
Note: If a decorative shroud is to be installed, contact manufacturer
for specifications.
24" Min.
24" Min.
Figure 18 - Multiple Chase Installation
10 FOOT RULE
All flue gas outlet chimney terminations must extend a minimum of
3 feet in height above highest point where it passes through roof and
must be at least 2 feet above highest point of the roof that is within
a horizontal distance of 10 feet (see Figure 19).
EFFECTIVE HEIGHT
OF TERMINATION CAP
14.5 FT.
MINIMUM
HEIGHT
12
VENTING INSTALLATION Continued
18"
FINISHING FIREPLACE
Min.
Combustible materials, such as wallboard, gypsum board, sheet
Typ.
rock, drywall, plywood, etc., may make direct contact with sides and
top around fireplace face. It is important that combustible materials
do not overlap face itself. Brick, glass, tile or other noncombustible
materials may overlap front face provided they do not obstruct es-
sential openings such as louvered slots. When overlapping with a
noncombustible facing material, use only noncombustible mortar
or adhesive.
EFFECTIVE HEIGHT
OF TERMINATION CAP
14.5 FT.
MINIMUM
HEIGHT
UP TO
6FT. MAX.
Figure 20 - Typical Residential Installations
Superiorfireplaces.US.com
10'
Level of
Flue Gas
Outlet
2' Min.
3' Min.
2' Min.
Figure 19 - 10 Foot Rule
EFFECTIVE HEIGHT
EFFECTIVE HEIGHT
OF TERMINATION CAP
OF TERMINATION CAP
MAX. HEIGHT
50 FT.
(ANY SYSTEM)
UP TO
6FT. MAX.
30E-8DM
10'
3' Min.
MIN. HEIGHT
OF 22 FT. (WITH
2 ELBOW SETS)
MAX. HEIGHT OF
50 FT.
30E-8DM
126619-01D
Advertisement
Table of Contents
