MSI RG60G User Manual page 75

Figure 3: Smart card or other Certificate Properties
B.4 Windows 2000 RADIUS server Authentication testing:
a. DUT authenticate PC1 using certificate. (PC2 follows the same test procedures.)
a.1 Download and install the certificate on PC1. (Fig 4)
a.2 PC1 choose the SSID of DUT as the Access Point.
a.3 Set authentication type of wireless client and RADIUS server both to EAP_TLS.
a.4 Disable the wireless connection and enable again.
a.5 The DUT will send the user's certificate to the RADIUS server, and then send the
message of authentication result to PC1. (Fig 5)
a.6 Windows XP will prompt that the authentication process successful or not, and will
end the authentication procedure. (Fig 6)
a.7 Terminate the test steps when PC1 get dynamic IP and PING remote host work.
Turbo 802.11b/g 4 Port Wireless Broadband Router
MSI RG60G
69