MSI RG60G User Manual page 37

Previous page and Next Page To make this setup page simple and clear, we have divided the "Control
4.4.3 Packet Filtering
Packet Filter enables you to control what packets are allowed to pass the router. Outbound filter applies
on all outbound packets. However, Inbound filter applies on packets that destined to Virtual Servers or
DMZ host only. You can select one of the two filtering policies:
1. Allow all to pass except those match the specified rules
2. Deny all to pass except those match the specified rules
You can specify 8 rules for each direction: inbound or outbound. For each rule, you can define the
following:
·
Source IP address
·
Source port address
·
Destination IP address
·
Destination port address
·
Protocol: TCP or UDP or both.
·
Use Rule#
Turbo 802.11b/g 4 Port Wireless Broadband Router
table" into several pages. You can use these buttons to navigate to
different pages.
MSI RG60G
31