Charging The Terminal Battery; Charging The Main Battery And Memory Backup Battery - Symbol PPT 8800 Series Product Reference Manual

PPT 8800 Series Product Reference Guide for Embedded Windows
5. Replace the new battery cover by inserting the top first, then pressing the bottom
down firmly.
6. Tighten the locking screw to secure the new battery cover to the terminal.
7. Re-attach the handstrap to the handstrap connector on the new battery cover.

Charging the Terminal Battery

Note: To charge the battery for your mobile device, battery and charger
temperatures must be between +32
(0 C and +40
°

Charging the Main Battery and Memory Backup Battery

Before using your terminal for the first time, charge the lithium-ion battery in the terminal for
about 2 1/2 hours, using the cradle or the serial charging cable.
Note: To ensure the quickest charging time, turn the terminal off while
charging.
Your terminal is equipped with a memory backup battery which automatically charges from
the fully-charged lithium-ion battery. This backup battery retains data in memory when the
terminal's battery is removed. When you first use your terminal, it takes about 24 hours to
charge the backup battery from the main battery.
1-10
Figure 1-8. Secure New Battery Cover
C).
°
F and +104 F
° °
®
CE .NET