Power Supply Unit Specifications; General Specifications; Performance Specifications - Panasonic FP7 Series User Manual

8.2 Power Supply Unit Specifications

8.2 Power Supply Unit Specifications

8.2.1 General Specifications

Items
Operating ambient
temperature
Operating ambient humidity 10 to 95%RH (at 25°C, no-condensing)
Storage ambient
temperature
Storage ambient humidity
Breakdown voltage
Insulation resistance
(Test voltage: 500 V DC)
Vibration resistance
Shock resistance
Noise resistance
Environment
EU Directive applicable
standard
Overvoltage category
Pollution degree
Weight (main unit)
(Note 1) Cutoff current: 10 mA (factory default setting)

8.2.2 Performance Specifications

Description
Product no.
Rated input voltage
Input
Input voltage amplitude
range
8-30
0 to +55°C
-40 to +70°C
10 to 95%RH (at 25°C, no-condensing)
All the AC inputs ←→ All the DC outputs
All the AC inputs ←→ Protective earth terminals 1500 V AC, 1 minute
All the AC inputs ←→ All the alarms
All the AC inputs ←→ All the DC outputs
All the AC inputs ←→ Protective earth terminals
All the AC inputs ←→ All the alarms
Conforming to JIS B 3502 and IEC 61131-2
5 to 8.4 Hz, 3.5 mm single amplitude
8.4 to 150 Hz, acceleration of 9.8 m/s
10 sweeps each in X, Y and Z directions (1 octave/min)
Conforming to JIS B 3502 and IEC 61131-2
2
147 m/s , three times each in the X, Y, Z directions
1,500 V [P-P], pulse width of 50 ns/1 μs (by noise simulator)
Free from corrosive gases and excessive dust.
EMC Directive: EN 61131-2, Low-Voltage Directive: EN 61131-2
Category II
Pollution degree 2
AFP7PSA1: approx. 240g
AFP7PSA2: approx. 290g
AFP7PSA1
Description
2300 V AC, 1 minute
2300 V AC, 1 minute
100 MΩ or larger
2
Rated voltage
100 to 240 V AC
85 to 264 V AC
(Note 1)
(Note 1)
(Note 1)
AFP7PSA2
WUME-FP7CPUH-09