Supported Passive Cables In Sn2010Bm; Speed - Nvidia Spectrum SN2000 Hardware User Manual

Using 5.0W Modules on Ports 49, 50, 55, 56 in SN2410M/SN2410bM

Supported Passive Cables in SN2010bM

• For server ports:
• 25GbE cables (all ports can be used):
• 1m-1.5m: any DAC
• 2m: MCP2M00-A002E30N
• 2.5m: MCP2M00-A02AE26N
• 3m: MCP2M00-A003E26N
• 10GbE cables (all ports can be used):
• 0.5m to 5m: any DAC
• For IPL ports (SN2010 to SN2010 connection):
• 40/100GbE cables (all ports can be used):
• No limitations
• 25GbE cables (only ports 3, 6, 9, 12, 15, 18 can be used)
• Up to 2m: any DAC
• 10GbE cables (all ports can be used):
• 0.5m to 5m: any DAC
• For connections with other switches:
• AOCs/Transceivers only
Supported 25GbE and 40/100GbE Cables on IPL Ports (SN2010 to SN2010 Connection)

Speed

Ethernet speed must be set manually. The system's ports can be manually configured to run at
speeds ranging from 10GbE to 100GbE (for more details, see Specifications). To change the port
speed configuration, use the command "speed" under interface configuration mode. Refer to the
NVIDIA Onyx (MLNX-OS) User Manual for instructions on port speed re-configuration.
58