Change Code; Programme Selection; Controls - Miele PDR 914 Operating And Installation Instructions

Change code

You can change the Supervisor level access code to protect the tumble dryer from
unauthorised access.
Enter the current code.

Then enter your new code.


Programme selection

Controls

You can select whether the tumble dryer is operated as a "laundrette" machine. Shortcuts
are the easiest way to operate the machine. Operators cannot change the preset
programmes.
Useful tip: Start by configuring all necessary settings and changes to the tumble dryer
before adjusting any of the options below.
Caution: When activating any of these options, the Supervisor level will no longer be
available.
You will no longer be able to access the Supervisor level via the display. Please follow
the instructions below if you wish to change any other settings.
Opening the Supervisor level (laundrette mode)
Switch the tumble dryer on and open the dryer door.

Touch the Start/Stop sensor and hold it down while carrying out steps –.

Close the tumble dryer door.

Wait until the Start/Stop sensor, which will now be flashing quickly, lights up

constantly ...
... then release the Start/Stop sensor.

Standard
-
Factory setting: All (selected) programmes are available.
Launderette, basic
-
4 programmes are available.
Favourite programmes
Under
Launderette Logo
-
12 programmes are available.
Favourite programmes
Under
The first three programmes can be selected directly. The remaining programmes are
selected via another list.
Launderette Logo ext. time
-
4 timed programmes* with different temperature levels are time-controlled via an external
payment system.
The set value indicates the running time and cannot be modified by the user.
This option is only available with an external payment system.
, you can set which 4 programmes to select/modify.
, you can set which 12 programmes to select/modify.
Supervisor level
43