MSI MEGA 651 User Manual page 62

Setting BIOS Function
CPU L2 Cache ECC Checking
This setting allows you to enable or disable the ECC (Error-Correcting Code) fea-
ture for error detection and correction when data passes through L2 cache memory.
Setting options: Disabled, Enabled.
Seek Floppy
Setting to Enabled will make BIOS seek floppy drive A: before booting the system.
Settings: Disabled, Enabled.
Boot Up Num-Lock Status
This setting is to set the Num Lock status when the system is powered on. Setting
to On will turn on the Num Lock key when the system is powered on. Setting to
Off will allow users to use the arrow keys on the numeric keypad. Setting options:
On, Off.
Typematic Rate Setting
This item is used to enable or disable the typematic rate setting including Typematic
Rate & Typematic Delay.
Typematic Rate (Chars/Sec)
After Typematic Rate Setting is enabled, this item allows you to set the rate
(characters/second) at which the keys are accelerated. Settings: 6, 8, 10, 12, 15,
20, 24 and 30.
Typematic Delay (Msec)
This item allows you to select the delay between when the key was first pressed
and when the acceleration begins. Settings: 250, 500, 750 and 1000.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4-9