Dimm Module Combination; Installing Ddr Modules - MSI Hetis 915 User Manual

DIMM Module Combination

Install at least one DIMM module on the slots. You can install either
single- or double-sided modules in any order to meet your own needs.
Memory modules can be installed in any combination as follows:
Slot
DDR 1
(Bank 0 & 1)
DDR 2
(Bank 2 & 3)
Maximum System Memory Supported
S: Single Side

Installing DDR Modules

1. The DDR DIMM has only one notch on the center of module. The
module will only fit in the right orientation.
2. Insert the DIMM memory module vertically into the DIMM slot.
Then push it in until the golden finger on the memory module is
deeply inserted in the socket.
3. The plastic clip at each side of the DIMM slot will automatically
close.
MSI Reminds You...
You can barely see the golden finger if the module is prop-
erly inserted in the socket.
Memory Module
S/D
S/D
D: Double Side
Volt
2-9
Introducing Mainboard
Total Memory
128MB~1GB
128MB~1GB
128MB~2GB
Notch