Input Characteristics
Overload
Function
[1]
Protection
Impedance
1000 V
L
10 MΩ <100 pF
F
[2]
1000 V
10 MΩ <100 pF
mV
10 MΩ <100 pF
K
1000 V
(ac-coupled)
Open Circuit
Overload
Test Voltage
Function
[1]
Protection
[2]
1000 V
5 V dc
e
[2]
G
1000 V
5 V dc
[1]
Input is limited to the product of a V rms sinewave times frequency of 2 x 10
[2]
For circuits <0.5 A short circuit. 660V for high energy circuits.
Burden Voltage (A, mA,
Function
mA, μA
A
Unpacking the Meter
Open the Multimeter box. Inside will be found a 189II/AN Digital Multimeter, one set of
test leads, a Product Manuals CD, a 189II/AN Users Manual, and a 189II/AN Service
Manual. Remove the Meter from its plastic wrapping.
Inspection
Inspect all contents for any visible shipping damage. Look for scratches or any other
damage. If the Meter is damaged, contact Fluke immediately using the contact
information listed in the "Contacting Fluke" section earlier in this manual. If it is
necessary to return the Meter, place it in its original packaging and return.
Common Mode
Input
Rejection Ratio
(1 kΩ unbalance)
>120 dB at dc,
50 Hz or 60 Hz
>120 dB at dc,
50 Hz or 60 Hz
>60 dB, dc to 60 Hz
Full Scale Voltage
≥5 MΩ or
To
500 kΩ
50 nS
550 mV
<5 V
3.1 V dc
μ
A)
Range
500 μA
5000 μA
50.000 mA
400.00 mA
5.0000 A
10.000 A
Normal Mode Rejection
>60 dB at 50 Hz or 60 Hz
>60 dB at 50 Hz or 60 Hz
Typical Short Circuit Current
500 Ω 5 kΩ
50 kΩ 500 kΩ 5 MΩ 50 MΩ 500 MΩ
1 mA 100 μA 10 μA
1 μA
1 mA
7
V-Hz.
Burden Voltage
True-rms Digital Multimeter
Unpacking the Meter
1 μA
0.3 μA
0.3 μA
102 μV/ μA
102 μV/ μA
1.8 mV/mA
1.8 mV/mA
0.04 V/A
0.04 V/A
9