Data Reading Errors; System Resource Errors - Teledyne SeaBat T Series Operator's Manual

TROUBLESHOOTING
Message
Failed to set up DMA Card 0,
ERROR =
Failed to allocate memory for
ADMXRC transfer.
Failed to set ADMXRC clock,
Card_1, ERROR =
Failed to get ADMXRC space info,
Card_1, ERROR =
Failed to configure 1st FPGA with
<x>, ERROR =
Failed to find ADMXRC info,
card_0, ERROR =
Failed to set ADMXRC clock,
Card_0, ERROR =
Failed to get ADMXRC space info,
Card_0, ERROR =
Failed to find ADMXRC info,
card_1, ERROR =
A.2.3 Data Reading Errors
Message
DMA Transfer Timeout. <x> of <x>
bytes received
FATAL: DMA Read size limitation
reached.
Lost sync with DMA read
A.2.4 System Resource Errors
Message
Error starting <name> thread.
SeaBat T-Series Subsea Operator's Manual
Version 7
Description
Description
This error generally indicates
that the uplink from the
receiver is interrupted at
some point.
A general error occurred
while transferring data to the
software.
Description
A module has failed to start
correctly.
Page 78
Action
Action
Check the BITE tab for
receiver BITE values to
try and localize the
failure to a component.
Check uplink cable
connections. Check
temperature of the SSP
via BITE. Restore
factory defaults. Reboot
the PC.
Reboot the system.
Action
Reboot the system.
January 31, 2019