Sonar User Interface (Sui) - Teledyne SeaBat T Series Operator's Manual

SYSTEM CONFIGURATION WITH USER INTERFACE
4.2

Sonar User Interface (SUI)

After the SeaBat hardware has been installed (see Appendix B Installation Instructions), the
system may be started.
As per the nature of AUV systems, during typical operations the Sonar UI will not be used;
however, it may be used when monitoring or testing the system while the SSP is on deck.
1. Double-click the Sonar UI icon on the customer-provided computer/laptop to start the
Sonar User Interface.
2. Locate the Hardware tab
the Hardware pane.
(Hovering the mouse over the tab will also open the pane.)
SeaBat T-Series Subsea Operator's Manual
Version 7
NOTE
on the right side of the user interface, and click to open
Page 16 January 31, 2019