Table of Contents
Advertisement
R-net Omni2 bluetooth set-up & operation user guide
4.3
Switch control set-up
Certain Omni2 commands can be assigned to iDevice commands. The Omni2 commands are detailed below.
Time-related deflections (nudges) of the joystick in each of the four directions.
Forward Short
Reverse Short
Left Short
Right Short
Forward Medium
Reverse Medium
The timings associated with the nudges are programmable.
Set the R-net programmable parameter Mode to Switch Control.
The procedure to enable Switch Control on the iDevice and assign commands is as follows.
From the iDevice Settings menu, select General > Accessibility.
11
7337A R-NET OMNI2 Set-up & Operation User Guide
Left Medium
Right Medium
Forward Long
Reverse Long
Left Long
Right Long
magicmobility.com.au
Advertisement
Table of Contents
