What To Do In Case Of Trouble - Canon MK3000 User Manual

What to Do in Case of Trouble

Problem
The power does not turn
on.
The display does not
change to the AC adapter
symbol even after the AC
adapter is loaded.
The remaining battery
charge is not displayed
correctly.
Cause/Things to Check
Check that the AC adapter
and power cord are properly
connected.
Are you using the supplied AC
adapter (PR-TP001) and power
cord?
Are the batteries installed in
the wrong direction?
Are the batteries low?
Are batteries other than the
specifi ed ones being used?
Check that the AC adapter
and power cord are properly
connected.
If you load batteries that
are not fully charged, the
remaining battery charge may
not be displayed correctly.
173
Solution
After confi rming that the AC
adapter and power cord are
connected, insert the power
plug fi rmly into the power
outlet.
Do not use anything other than
the supplied AC adapter (PR-
TP001) and power cord. Failure
to do so may result in fi re,
electric shock, or malfunction.
Make sure that all batteries
are installed correctly in the
direction marked on the inside
of the battery case.
Replace the batteries or use the
included AC adapter (PR-TP001).
Use the specifi ed batteries.
(P.13)
Turn off the power, make sure
the AC adapter and power cord
are connected, and then insert
the power plug fi rmly into the
power outlet.
Use fully charged batteries.