Troubleshooting - Master MWC Series Installation And Operation Manual

Ultraviolet sterilizers
Table of Contents

Advertisement

MWC-ES SERIES

TROUBLESHOOTING

Symptom: No flow of water no Alarm and Gland Nut not glowing
Cause
Solution
Electric Supply
Check electrical outlet and breaker box for power.
Replace fuse (Buzz 5 amp) in Power Supply
5 Amp Fuse
Symptom: No flow of water or Alarm and
is
Gland Nut
glowing blue.
Cause
Solution
Turn off water and release pressure to the MWC-EM
Solenoid
unit. Remove solenoid coil and clean port and
plunger.
Defective solenoid replace
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mwc-es seriesMwc-es7Mwc-es10Mwc-es20

Table of Contents