Lowrance iWAY 600C Quick Start Manual page 4

The flexible arm mount allows you to make non-mar installations with-
out drilling, screws or permanent adhesives. Since the mount is port-
able, it's easy to transfer the GPS unit to another vehicle.
WARNING:
When mounting a GPS unit in an automobile you must
avoid any installation that obscures important instru-
ments and controls or restricts the driver's view through
the vehicle's windows. Avoid placing the GPS where it
could be propelled by an activated airbag. Some states
restrict mounting any electronic device in any location
on an automobile dash or windshield.
Be sure to check your local laws before using these
mounts. Be sure to check the suction mount for ade-
quate adhesion each time you use the unit and reinstall
it if necessary. This is a portable mounting device and
the normal heating and cooling cycle of a car's interior
will eventually loosen the seal. A loose suction cup could
allow the unit to fall or come loose during vehicle opera-
tions.
Installing the flexible suction cup mount
The suction cup base and arm can be adjusted to a position that best
suits your vehicle. The mounting surface should be free of dirt and oil.
While you can attach the flexible suction cup mount to the windshield
before attaching the unit to the suction cup mount, it may be easier if
the suction cup mount is connected to the unit first. You can then at-
tach the entire assembly to the car's windshield.
Suction
release
tab
Suction
cup
base
Unit resting on dash with flexible suction cup mount.
GPS unit
resting on
dash
Locking
lever
3