Lowrance iWAY 350C Quick Start Manual page 6

The map display toolbar buttons are, from top to bottom:
Clear Cursor clears the toolbar from the screen and centers the map
on your current position.
Move Map or Zoom Box lets you toggle between these two modes:
Move Map Mode lets you drag the map with a touch, focusing on ar-
eas other than your current location. When this button is in Move Map
Mode, press anywhere on the map display and a cursor will appear.
Drag your finger across the screen (still pressing down) and the map
and cursor will move with it.
Zoom Box Mode lets you draw a box on the screen and zoom in on the
map area within the box. When this button is in Zoom Box Mode, press
the screen at the corner of the area you want to select and drag your
finger across the area (still pressing down). You will see a box appear
on the screen. When the box contains all the area you want to see, lift
you finger and the map display will zoom in.
Zoom In and Zoom Out will change the current zoom level, moving in
or out from the cursor's location. Control the zoom to get the most de-
tail possible while still showing all of the necessary area. Use these
buttons in combination with the Move Map function to focus on an area
other than your current location.
There is one more button that appears whenever the cursor is up, but it is
not part of the toolbar. The Information button appears in the top right
corner of the screen. Push this button to bring up the Location
Information screen. From the information screen, you can choose
to "Go To" the selected location, which makes the iWAY generate a
route. See the Go To description on page 5 for details. When you clear the
cursor, the Information button is replaced by one with a flag symbol, al-
lowing you to create a new address book entry at your current position.
See the manual for details on address creation.
Pressing the
manual for complete details on Main Menu settings. From the Main
Menu, choose Options to access some of the more powerful Map Mode
tools. (The Options Menu has three option Pages.) Some of the most
important commands in the Options Menu are:
Directions List shows all the textual instructions for the route you're
currently following. See page 6 for details on following a generated
route. Press on an entry in the list to get a close-up preview of the turn.
Auto Zoom toggles the iWAY Auto Zoom feature on and off.
Routing Options lets you tell the iWAY which kinds of roads to take,
or control other route generation preferences.
Overlay Data Setup is another important option on the Options
Menu, but it is described later in this quick start guide.
button
M
ENU
will bring up the Main Menu. See the
4