Table of Contents
Advertisement
Display problem
Screen is blank
•
Nothing is displayed when
•
When the power is turned on, [READY] flashes and then goes blank.
The Air GPS has run out of battery power.
Follow the procedure under
Screen is frozen
Open the rubber cover on the Air GPS and press the AC button to format the Air GPS.
After formatting the Air GPS, the settings will be restored when it is next connected
to a smartphone (Cateye Cycling™).
Caution!:
•
Formatting will restore the Air GPS to factory default settings, deleting trip data.
To save the trip data, connect the Air GPS to a PC and copy trip data (FIT files)
to the PC before formatting. (The firmware version will be retained.)
•
Keep the rubber cover firmly in place to maintain waterproofness.
The Air GPS keeps showing smartphone link screen and won't accept button operation.
•
Is the Air GPS connected to the smartphone (Cateye Cycling™)?
The Air GPS will not show the measurement screen when it is connected to the
smartphone (Cateye Cycling™).
Turn [Connect] off in Cateye Cycling™.
Backlight does not come on
•
Is the time set for Night Mode correct?
The Air GPS determines when to turn on and off the backlight using the on/off
setting of Night Mode.
For details, see
"Setting the Air GPS" (page
* When automatic display illumination is enabled, the time is automatically adjusted
according to the sunset and sunrise times.
(POWER) is held down.
"Charging the Air GPS" (page 3)
18).
33
Frequently Asked Questions
to charge the Air GPS.
Cover,
Introduction
1
Setup
2
Mounting on a
bicycle
3
Starting
measurement
4
Measurement
results
5
SET
Changing settings/
Using sensors
Frequently
Asked
Questions
3/11
Appendix
Advertisement
Table of Contents
