DOK-SUPPL*-VAC*01*****-IT04-EN-P
IndraControlVAC 01 Y-Repeater
9.2
CDI interface
Input ESM
Passive operator display
0 (no 24 V available)
"Energy Save Mode" at the passive operator display is not
enabled
1 (24 V available)
"Energy Save Mode" at the passive operator display is en‐
abled
Tab. 9-6:
Enables the "Energy Save Mode" at the passive operator display
No operation possible at the operator display at which the power
LED flashes (operator display is passive).
The power LED is permanently on at the active operator display.
The Y-repeater is connected to the control cabinet PC and to two operator
displays via the CDI interfaces (XSER, XVID, XSER1, XVID1, XSER2,
XVID2).
Connection
Function
XSER, XVID
CDI interface to the control cabinet PC
XSER1, XVID1
CDI interface to operator display no. 1
XSER2, XVID2
CDI interface to operator display no. 2
Tab. 9-7:
Assigning the three CDI interfaces
Bosch Rexroth AG
23/53
Interfaces