Standards; Ce Marking; Declaration Of Conformity - Bosch Rexroth IndraControl VAC 01 Operating Instructions Manual

DOK-SUPPL*-VAC*01*****-IT04-EN-P
IndraControlVAC 01 Y-Repeater
7

Standards

7.1

CE marking

7.1.1

Declaration of conformity

Standard Meaning
EN 60 61000-6-4 Generic standards - Emission standard (industrial environ‐
ments)
EN 60 61000-6-2 Generic standards – Noise immunity (industrial environ‐
ments)
EN 61558-2-6 Transformer for 24 V power supply unit, safe separation
EN 60664-1 Overvoltage category II
EN 60 529 Degrees of protection (including housings and installation
compartments)
EN 60 068-2-6 Vibration test
EN 60068-2-27 Shock test
EN 60721-3-3 Classification of ambient conditions, operation
EN 60721-3-2 Classification of ambient conditions, transport
EN 60721-3-1 Classification of ambient conditions, storage
UL 508 Industrial Control Equipment
Tab. 7-1: Used standards, Y-repeater
The electronic products described in the present operating instructions com‐
ply with the requirements and the target of the following EU directive and with
the following harmonized European standards:
EMC directive 2004/108/EC
The electronic products described in the present operating instructions are in‐
tended for use in industrial environments and comply with the following re‐
quirements:
Standard Title
DIN EN 61000-6-4 Electromagnetic compatibility (EMC)
(VDE 0839-6-4) Part 6-4: Generic standards – Emission standard
for industrial environments (IEC 61000-6-4:2006)
DIN EN 61000-6-2 Electromagnetic compatibility (EMC)
(VDE 0839-6-2) Part 6-2: Generic standards – Noise immunity for
industrial environments (IEC 61000-6-2:2005)
Tab. 7-2: Standards for electromagnetic compatibility (EMC)
Loss of CE conformity due to modifications at the device.
CE marking applies only to the device upon delivery. After modify‐
ing the device, verify the CE conformity.
Bosch Rexroth AG 17/53
Standards
Edition
September
2007
March
2006