Mac Address; Install Software - Lorex L19LD1600 Series Quick Start Manual

STEP 2 - SET UP LOCAL VIEWING ON YOUR PC

1
*your system must Be connected to
a router prior to powering it on.
IP ADDRESS:

MAC ADDRESS:

(required for ddns registration)
2
3
4
L19LD1600 Series
RETRIEVE SYSTEM INFORMATION:
1. access the main menu setup screens, and navigate to the system
menu - externaL device - tcp/ip setup - ip config setup option.
2. record the mac address of your system. this information is necessary
for the ddns setup process.
3. confirm that the dHcp mode is set to automatic. this will allow your
system to lease an ip address from your router. if the system is not set to
automatic, change the setting in the dHcp setup menu and click
detect ip.
4. the ip port is 50000 by default.
RECORD THE IP AND MAC ADDRESSES IN THE SECTION BELOW:
. . .

INSTALL SOFTWARE:

(on your local computer)
insert the Lorex software cd into your local computer's cd rom
drive and proceed with the installation.
LOREX INTERNET REMOTE SOFTWARE (IRS):
1
(on your local computer)
follow the installation screens to complete Lorex internet remote
(isa) software installation.
2
LOREX INTERNET REMOTE SOFTWARE (IRS):
(on your local computer)
close the cd menu screen. a Lorex internet remote software (irs) icon
will appear on your desktop.
RUN THE LOREX CLIENT 5.0 SOFTWARE:
(on your local computer)
double-click the Lorex internet remote software (irs) icon on your desktop to
run the program. from the main screen, click Lorex cLient 5.0
R1
Quick Set-Up Guide
3 4
note: the system will lease networking
information from your router. if you wish
to set your information manually, then
set the dHcp mode to manuaL. please
consult your Hardware manual for further
menu options.
5