Table of Contents
Advertisement
10. Extend the output tray to accommodate the size of the paper
loaded in the MP tray to prevent it from falling off the edge.
By default, the printer is set up to print on A4 size paper. If you
are printing on any other paper size, you need to change the
printer's paper size setting by using the paper size switch
described above, and the printer driver.
Loading an uncommon paper size
You can print on the custom-size paper (paper ranging from 100
× 148 mm to 297 × 420 mm, weighing from 64 to 128 g/m²) using
the MP tray.
Note:
Use the paper of the ranging from 100 × 148 to 297 × 420 mm and
weighing from 64 to 128 g/m², and load the paper into the MP tray.
c
Caution:
Be sure to set the paper size switch to Others. Otherwise, paper
jams may occur.
Chapter 2 Paper Handling
31
Advertisement
Table of Contents
