Connecting A Slave Monitor - Appendix #3 - Lorex SC325000 Instruction Manual

Connecting a Slave Monitor - Appendix #3

Connections to a Slave Monitor (not included) can be made through the VIDEO OUT ports on the
back of the DVR
A Slave Monitor is used as a View Only device. A Slave Monitor can only display camera data as
it is shown on-screen on the DVR.
Specific controls for the DVR are configured through the Menu Options
1. Connect the VIDEO OUT port on the back of the DVR to the VIDEO IN port on the back of the
Slave Monitor
2. Connect the AUDIO OUT port on the back of the DVR to the AUDIO IN port on the back of the
Slave Monitor
Connecting a Slave Monitor - Appendix #3
DVR
SLAVE MONITOR
(Not Included)
39