Table of Contents
Advertisement
Display Setup
Display Setup
1. TIME DISPLAY: Turns the onscreen Time display ON or OFF.
Navigate using the
the setting to ON or OFF.
2. TITLE DISPLAY: Turns the onscreen Camera Title display ON or
OFF. Navigate using the
change the setting to ON or OFF.
3. VOICE DISPLAY: Displays an indicator icon on the channel
currently sending sound. Navigate using the
press + and - to change the setting to ON or OFF.
4. HDD CAPACITY: Turns the onscreen Hard Drive Capacity display
ON or OFF. Navigate using the
- to change the setting to ON or OFF.
5. BORDER COLOR: Turns the Quad screen Border Color. Navigate using the
and press + and - to change the setting to White, Yellow, Gray, Light Green or No Border.
6. DATE FORMAT: Sets the date format for the DVR unit. Navigate using the
and press + and - to change the setting to 12 or 24 hour display type.
7. PRIMARY CHANNEL: Sets the default displayed Channel. Navigate using the
and press + and - to change the setting to CH1, CH2, CH3, CH4 or QUAD.
8. SEQ MODE: Turns Sequence Mode ON or OFF. Navigate using the
+ and - to change the setting to ON or OFF.
9. SEQ INTERVAL: Sets the length of time each channel is displayed in Sequence Mode. Navigate
using the
and
32
and
buttons, and press + and - to change
and
buttons, and press + and - to
and
buttons, and press + and
buttons, and press + and - to set the time between 1-7 seconds.
and
buttons, and
TIme Display: ON
Title Display: ON
Voice Display: ON
HDD Capacity: ON
Border Color: White
Time Format: 12 Hours
Date Format: M-D-Y
Primary Channel: Quad
Seq Mode: OFF
Seq Interval: 3 Sec
and
buttons,
and
buttons,
and
buttons,
and
buttons, and press
Advertisement
Table of Contents
