Subaru Outback 2015 Manual page 69

4. While following the instructions sup-
plied by the child restraint system manu-
facturer, connect the connectors of the
child restraint system to the anchor bars.
When the connectors are fastened, make
sure that the adjacent seatbelts are not
caught.
Seat, seatbelt and SRS airbags/Child restraint systems
1) Inserting aid
NOTE
If your child restraint system is pro-
vided with inserting aids, clip them to
the two ISOFIX anchor bars before
connecting the child restraint system.
Position the two connectors just in
front of the two inserting aids. Then
insert the two connectors into the
inserting aids to connect the connec-
tors to the anchor bars.
The inserting aids make it easier to fit
the child restraint system with ISOFIX
and avoid damage to the seat.
5. Before seating a child in the child
restraint system, try to move it back and
forth and right and left to verify that it is
firmly secured in the center of the seat.
– CONTINUED –
1-41