Table of Contents
Advertisement
PANEL TEST MODE
This mode is used to check the LEDs, button, MASTER VOL-
UME dial, OPERATION DIAL ring, system software version,
DVD lib version, model name and destination.
Procedure:
1. Press the [
] button to turn on the system.
?/1
2. Press the [
] button, [DISC 3] button and [USB] button simul-
x
taneously.
3. Power illuminator LEDs are lighted up.
4. When you want to enter to the system software version display
model, press the [DISC 1] button. The system software version
appears on the LCD module.
Press the [DISC 1] button again, the DVD lib version appears
on the LCD module.
5. Press the [DISC 2] button the mode name and destination on
the LCD module.
6. Press the [DISC 3] button the key encode test mode is acti-
vated.
7. In the key encode test mode, the LCD module displays "KEY
0 0 0 0 0".
Each time a button pressed, change the each numbers.
•
To release from Panel Test Mode
1. To release from this mode, press the [
ton and [USB] button simultaneously.
DVD SHIP MODE (WITHOUT MEMORY CLEAR)
This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
1. Press the [
] button to turn on the system.
?/1
2. Press the [DVD] button, to set the "NO DISC" mode.
3. Press the [
] button and [
N
The system will turn off automatically.
4. After the "STANDBY" blinking display fi nishes, a message
"LOCK" appears on the LCD module and the DVD ship mode
is set.
•
To release from DVD Ship Mode
1. To release from this mode, press the [
DVD SHIP MODE (WITH MEMORY CLEAR)
This mode moves the optical pick-up to the position durable to vi-
bration and clears all data including preset data stored in the RAM
to initial conditions after the power supply is turned off. Use this
mode when returning the set to the customer after repair.
Procedure:
1. Press the [
] button to turn on the system.
?/1
2. Press the [DVD] button, to set the "NO DISC" mode.
3. Press the [TUNING –] button, [DISC 3] button and [
ton simultaneously.
4. After the "STANDBY" blinking display fi nishes, a message
"COLD RESET" appears on the LCD module and the DVD
ship mode is set.
•
To release from DVD Ship Mode
1. To release from this mode, press the [
] button, [DISC 3] but-
x
] button simultaneously.
?/1
] button.
?/1
] but-
?/1
] button.
?/1
DISC THEFT PREVENTION MODE
This mode let you lock the disc tray. When this mode is activated,
the disc tray will not open.
Procedure:
1. Press the [
] button to turn on the system.
?/1
2. Press the [DVD] button.
3. Press the [
] button and [OPEN/CLOSE
x
neously and hold down until "LOCKED" or "UNLOCKED"
appears on the LCD module (around 5 seconds).
•
To release from Disc Theft Prevention Mode
1. This mode will not be deselected only by turning the power
off. To exit from the mode, perform the above item 3 again.
AM TUNER STEP CHANGE
The step interval of AM channels can be toggled between 9 kHz
and 10 kHz.
Procedure:
1. Press the [
] button to turn on the system.
?/1
2. Press the [TUNER/BAND] button repeatedly to select the
"AM".
3. Press the [
] button to turn off the system.
?/1
4. Press the [TUNING +] button and [
ously. The system will turn on automatically.
5. The message "AM 9K STEP" or "AM 10K STEP" appears on
the LCD module and thus the channel step change.
VIDEO/SAT FUNCTION CHANGE
This mode let you change from VIDEO to SAT and vice-versa.
Procedure:
1. Press the [
] button to turn on the system.
?/1
2. Press the [VIDEO/SAT] button.
3. Press the [VIDEO/SAT] button and [
The function will change to SAT.
4. Press the same button again to change from SAT to VIDEO.
VACS DISPLAY MODE
The VACS level can be displayed.
Procedure:
1. Press the [\/1] button to turn on the system.
2. Press the [TUNING –] button, [DISC 1] button and [PRESET
EQ] button simultaneously.
3. The VACS level appears on the LCD module.
VACS ON/OFF CHANGE MODE
The VACS on/off can be changed.
Procedure:
1. Press the [\/1] button to turn on the system.
2. Press the [TUNING –] button, [DISC 2] button and [PRESET
EQ] button simultaneously.
3. The VACS on/off is changed.
HCD-PZ1D
] button simulta-
Z
] button simultane-
?/1
] button simultaneously.
x
29
Advertisement
Table of Contents
