Logitech G9X User Manual page 14

14
Compliance
Important .Ergonomic .Information: .Long periods of repetitive motion using an improperly
set-up workspace, incorrect body position, and poor work habits may be associated with physical
discomfort and injury to nerves, tendons, and muscles. If you feel pain, numbness, weakness,
swelling, burning, cramping, or stiffness in your hands, wrists, arms, shoulders, neck, or back, see a
qualified health professional. For more information, please read the Comfort Guidelines located
on the Logitech web site at http://www .logitech .com/comfort, or on the Logitech Software.
® ®
International .Standards .and .Safety .This optical device complies with International Standard
IEC 60825-1: 2001-08, Class 1 Laser Product Invisible and also complies with 21 CFR 1040.10
and 1040.11, except for deviations pursuant to Laser Notice Nr. 50, dated July 26, 2001:
Emission of a parallel beam of infrared user-invisible light Maximum power 716 microwatts CW,
wavelength range 832 - 865 nanometers Operating temperature between 0°C (32°F) to 40°C
(104° F). CAUTION: .This optical device has no serviceable parts. Use of controls or adjustments
or performance of procedures other than those specified herein may result in hazardous
radiation exposure. Guidelines for safe and efficient Use. A Class 1 Laser Product is safe under
reasonably foreseeable conditions of operation, including the use of optical instruments for
intrabeam viewing. It is recommended to observe the following precautions: 1. Do not direct
the infrared beam at anyone's eye. 2. In the absence of proper operation and if troubleshooting
is unsuccessful, switch off the device and call Logitech technical support. 3. Do not attempt
to disassemble your product unless it is for end-of-life disposal. 4. Do not expose your product to
liquid, humidity, or moisture. 5. Do not operate your product when the temperatures is outside
the specified operating range of 0°C (32°F) to 40°C (104° F). 6. In case of exposure to out-of-
range temperature environment, switch off the device, and allow temperature to stabilize within
the specified operating temperature range before operating.
Compliance . .Your product is FCC and CE compliant; it is also UL tested and should only be
used with other UL listed devices. For compliance information, go to http://www .logitech.
com/compliance.
English