Advertisement
Available languages
Available languages
Profiles
Go to www .logitech .com for more detailed
information on configuring and using your mouse
setting profiles. Help is also available as you navigate
through the configuration panel in SetPoint's
advanced software for the G9x.
Your G9x can store up to 5 profiles of mouse
settings in on-board memory on your mouse
hardware, but when using the SetPoint
you can save many more profiles on your hard
drive. Out of the box, your G9x comes with 3 pre-
configured profiles in on-board memory. You can
store up to 2 more on your mouse (choose from the
profiles you create in software), or reduce down to a
single profile on your mouse.
There are many mouse settings that can be
configured in a profile. These include:
•
Button assignments
•
Keyboard macros assignable to mouse
buttons
•
DPI settings (dpi levels, number of dpi levels)
•
LED display color (choose from broad color
spectrum)
•
Report rate (125-1000 reports/second)
English
You need to have SetPoint
configure your profiles. However, once you set up
and save a profile, you can designate up to five of
your profiles to be "burned" into your G9x's on-
board memory. If you use your mouse on another
PC or un-install SetPoint
those profiles will still work on your G9x. (Note:
There are a few special settings that can only work
software,
®
while SetPoint
you choose a setting where this is true, SetPoint
notify you.)
With SetPoint
Application Detection if you choose. When
Application Detection is running, the profiles in
on-board memory are not necessarily active (unless
you specify application-specific behavior for them).
You will not be able to toggle between profiles using
your mouse switching buttons.
There will be a main profile on your mouse (Profile
1 shipped out-of-box) that will be enabled for all
applications when Application Detection is running.
This main profile can be edited. You can then
designate additional profiles in your Profile Library
to run when your PC detects a specific application
or game running. Your mouse will automatically
employ the designated profile settings once it
detects the corresponding application. In all other
applications where a specific profile is not specified,
the mouse will employ the main profile behavior.
®
installed in order to
, your mouse settings for
®
is running on your PC; in the case
®
®
running, you can also enable
11
®
will
Advertisement
