Mounting Plate - Honeywell GAMEWELL LCD-SLP Product Installation Document

2.8 LCD-SLP Installation in a Retrofit Cabinet Configuration
2.8.1 LCD-SLP Installed to a B-Slim Cabinet Outer Door
1. Insert the keyswitch to the LCD-E3 Mounting Plate. Insert and secure one nut, (3/4" x 24 THD HEX) as shown in Location 1 of
the figure below.
2. Attach the keyswitch cable to the key as shown in Location 2 of the figure below.
3. Mount the LCD-SLP keypad to the pins on the LCD-E3 Mounting Plate. Insert and secure eight, nuts (#6-32 HEX KEPS) into
the eight-hole mounting pattern as shown in Location 3 of the figure below.
4. Plug-in the keyswitch cable to the J6 jumper on the LCD-SLP keypad as shown in Location 4 of the figure below.
(For information on the location of the J6 jumper on the LCD-SLP panel, refer to Note 1 on the LCD-SLP Wiring Diagram in
Figure 3.2.1.1 and Figure 3.2.2.1).
5. Mount the LCD-E3 Mounting Plate to the outer door. Insert and secure four nuts (#6-32, HEX KEP) into the four-hole
mounting pattern as shown in Location 5 of the figure below.
2.8.2 LCD-SLP Installed to a 600XL Retrofit Display Inner Door
1. Insert the keyswitch snap-in plug into the keyhole in the LCD-E3 Mounting Plate as shown in Location 1 of the figure below.
2. Mount the LCD-SLP keypad to the pins on the LCD-E3 Mounting Plate. Insert and secure eight nuts (#6-32 HEX KEPS) into
the eight-hole mounting pattern as shown in Location 2 of the figure below.
3. Mount the LCD-E3 Mounting Plate to the 600XL Retrofit Display inner door. Insert and secure four nuts (#6-32, HEX KEPS)
into the four-hole mounting pattern as shown in Location 3 of the figure below.
600XL RETROFIT
DISPLAY INNER
DOOR
Figure 2.8.2.1 LCD-SLP Installed to a 600XL Retrofit Display Inner Door
8
LCD -E3
M O UNTING PLA TE
KEYSW ITCH
CABLE
5
NU T,
5
6
(¾ " x 24 TH D HEX )
2 PLAC ES
(KEYLO C K AND K EYSW ITCH )
6
K EYLO CK ,
PK 625
Figure 2.8.1.1 LCD-SLP Installed to a B-Slim Cabinet Outer Door
LCD-E3

MOUNTING PLATE

3
3
LCD-SLP Product Installation Document — P/N LS10045-000GF-E:E 12/16/2019
LC D -S LP
5
3
4
2
P 2, KEYSW ITCH C ABLE
3 1
(2 PIN R T.ANG LE HEADER )
1
(NO TE: ATTACH TO W 2 O N
5
THE LCD -SLP PANEL).
NUT, #6-32,
HEX KEPS
4 PLACES
LCD-SLP
3
2
2
3
1
PLUG, NUT, #6-32
DOUBLE-D HEX KEPS
(SNAP INTO 4 PLACES
KEYHOLE)
3
3
NU T, #6-32,
HEX KEPS
8 PLACES
2
2
NUT, #6-32
HEX KEPS
8 PLACES