My Buttons Aren't Working The Way I Want; The On Demand Command Isn't On The Harmony 900 For The Watch Tv Activity; When Pressing Buttons In An Activity, The Remote Sends The Command Twice; Some Commands Are Missing On My Harmony 900 Remote Screen - Logitech Harmony 900 User Manual

My buttons aren't working the way I want

The On Demand command isn't on the Harmony 900 for the Watch TV Activity

You can map the command to any unused button on the Harmony 900 or on the remote's screen.
The command is likely in our database, but wasn't mapped to the Activity. If we're missing
the command, the Harmony 900 can learn it from your original remote. For more information,
see Teaching your Harmony 900 new commands.

When pressing buttons in an Activity, the remote sends the command twice

Try lowering the repeats for the device that is receiving the command. You can do this by using
the troubleshoot option in the Harmony Remote Software.

Some commands are missing on my Harmony 900 remote screen

All of the commands for your remote will be located in the device in your Harmony Remote
Software.
1. From you Harmony Remote Software account:
Device tab.
2. Select your
Settings device you want to find the commands for.
3. Select
4. Select Customize Buttons.
You will see all of the hard and soft button commands for your device. You can change the way the
soft buttons appear on your screen by using the arrows to move the commands up or down the list.
If you don't see the command you are looking for in either the hard or soft button list,
the Harmony 900 can learn it from your original remote. For more information, see
Harmony 900 new commands.
Teaching your
45