Panasonic Lumix DMC-LS1S Service Manual page 23

Attribute
HARD
SOFT
- 5. How to returned to Normal Display:
NOTE:
The error code can not be initialized by the unit only.
PDF created with pdfFactory Pro trial version
Main item Sub item
VENUS A/ Flash
D
FLASH FLASH
ROM / ROM /
(EEPROM (EEPROM
/ Area) / Area)
SYSTEM RTC
CPU Reset
Card Card
Stop
CPU, /
ASIC hard
Monitor
Memory
Built-in /
memory
Turn the power off and on, to exit from Error code display
mode.
Error code
High 4 Low 4
bits bits
2000 0000 Flash charging error.
IC6001-(13) signal line or Flash charging circuit
2B00 0001 EEPROM read error
IC6002 (FLASH ROM)
0002 EEPROM write error
IC6002 (FLASH ROM)
2C00 0001 SYSTEM IC initialize failure error
Communication between IC6001 (VENUS PLUS)
IC9101 (SYSTEM)
3000 0001 NMI reset
| Non Mask-able Interrupt
0007 (30000001-30000007 are caused by factors)
3100 0001 Card logic error
SD card data line or IC6001 (VENUS PLUS)
0002 Card physical error
SD card data line or IC6001 (VENUS PLUS)
0003 Read error
SD card data line or IC6001 (VENUS PLUS)
0004 Write error
SD card data line or IC6001 (VENUS PLUS)
0005 Format error
SD card data line or IC6001 (VENUS PLUS)
3800 0001 Camera task finish process time out.
Communication between Lens system and IC6001
(VENUS PLUS)
0002 Camera task invalid code error.
IC6001 (VENUS PLUS)
0100 File time out error in recording motion image
IC6001 (VENUS PLUS)
0002 File data send error in recording motion image
IC6001 (VENUS PLUS)
1000 AF frame movement check time out.
IC6001 (VENUS PLUS)
3900 0005 Built-in memory format error
FLASH ROM data line or IC6001 (VENUS PLUS)
23
www.pdffactory.com
Contents (Upper)
Check point (Lower)