Panasonic Lumix DMC-LS1S Service Manual page 19

- 2. The display of error code:
- 3. The change of display:
- 4. How to read the error code:
PDF created with pdfFactory Pro trial version
While keep pressing [Optical Image Stabilizer] and " [UP] of
Cross key" simultaneously and hold them, turn the Power on.
Press [Optical Image Stabilizer] , [MENU] and " [LEFT] of
Cross key" simultaneously with the step 1 condition.
The display is changed as shown below when the above
buttons is pressed simultaneously.
Normal display
display Normal display
The error code can be memorized 32 error codes in sequence,
however it is displayed 5 errors on the LCD.
Display can be changed by the following procedure:
" [UP] or [DOWN] of Cross key": It can be scroll up or down
one.
" [LEFT] or [RIGHT] of Cross key": It can be display last 5
error or another 5 error.
One error code is displayed for 8 bit, the contents of error
codes is indicated the table as shown below.
Error code display
.....
Example of Error Code Display
19
www.pdffactory.com
Operation history