American Standard CCAS6519-3110410C0 Installation Instructions Manual page 11

Test
1.Ensure both power and water supplies are connected.
2.Turn on the water supply, and make sure there are no leakages.
3.Stand within the sensor zone for 3s for sensor to detect user. Flushing will commence 2s after user leaves position and flushing will last 3.3s.
4.Once steps 1 to 3 are completed, the urinal is in good working order.
Waiting
测试
1.确保电源和供水已接好；
2.开启供水，确认各连接处无渗漏；
3.当人进入感应区域，装置进入待冲洗状态，等待至少3s，人离开了感应区域2s后，自动开阀冲洗3.3秒后自动关阀。
4.完成第一至第三步，小便斗可以正常使用。
待机
When enter the sensor zone,
sensor dectect is waiting
for start flush.
人进入感应区域，
装置进入待冲洗状态。
- 10 -
When people leave the
detective zone, the urinal
will flush 3.3 seconds
then stop.
人离开了感应区域，
冲洗3.3秒后自动关阀。