Page 1
Make sure Cubase is already installed on your computer. If not, please install and run it at least once and quit Cubase again. • Run the Aura_Steinberg_Support installer, included in the package along with this PDF guide.. • Connect Aura to your computer or a powered USB hub connected to your computer and make sure it‘s switched on. • Launch Cubase. •...
Page 2
Aura and Cubase Working Together When Aura is connected and detected by Cubase, the [DAW] button is illuminated blue and the display has been updated. The [DAW] button toggles Cubase control on/off when Nektarine is present on a track. Transport Buttons Aura‘s transport buttons control Cubase ‘s transport functions exclusively, regardless of whether Nektarine mode, Aura‘s Sequencer,...
Page 3
Routing Aura’s MIDI Out to a Specific Track in Cubase Routing Aura to one specific track is useful. If you plan to use the sequencer running alongside Cubase for example, routing to one track only prevents the sequencer from playing notes on other tracks, as they are selected. To set this up, complete the following steps.