Advertisement
Quick Links
Nektar Aura: Reason Setup and User Guide
Setup
The Aura Reason integration is compatible with Reason 6 or higher.
Here are the steps you need to go through to get Reason up and running with Aura:
•
Make sure Reason is already installed on your computer. If not, please install and run it at least once and quit Reason again.
•
Run the Aura_Reason_Support installer, included in the package along with this PDF guide.
•
Connect Aura to your computer via USB and make sure it's switched on.
•
Launch Reason and go to Edit/Preferences/Control Surfaces,.
•
Click "Auto-detect surfaces". The Aura Control Surface appears in the Control Surfaces list once it's detected by Reason.
That's it, setup is now complete and Aura should be communicating with Reason.
1.
www.nektartech.com
Nektar Aura Reason Integration
1
Advertisement
Related Manuals for Nektar Aura
Summary of Contents for Nektar Aura
- Page 1 Launch Reason and go to Edit/Preferences/Control Surfaces,. • Click “Auto-detect surfaces”. The Aura Control Surface appears in the Control Surfaces list once it’s detected by Reason. That’s it, setup is now complete and Aura should be communicating with Reason. www.nektartech.com...
- Page 2 Aura and Reason Working Together With Reason connected to Aura, the [DAW] button is illuminated blue and the display has been updated. The [DAW] button toggles Reason control on/off when Nektarine is present on a track Transport Buttons Aura‘s transport buttons control Reason‘s transport functions exclusively, regardless of whether Nektarine mode, Aura‘s Sequencer, Internal mode or Repeat is selected.
- Page 3 Press and hold [Mute] while pressing one or more pads. Pads that are Mute’ed are not illuminated upon release.. Support If you are not getting the results described, please check your installation one more time as well as the Nektar support tab on our website www.nektartech.com. You can also contact our support staff here www.nektartech.com...