Bitwig Studio Mixer Control Bitwig Studio Instrument (Device) Mode Bitwig Studio Drum Machine Container Device Bitwig Studio Instrument Layer Container Device Transport Mode Transport Mode Launcher Launching Clips Using Transport Buttons Step Sequencer Using Nektar Panorama P-Series with Bitwig Studio www.nektartech.com...
Next check that the Panorama control surface is available in the Bitwig Settings/Controllers menu, when you click Add and select Nektar. If all is ok and Panorama is still not detected, restart your computer. www.nektartech.com Using Nektar Panorama P-Series with Bitwig Studio...
Page 4
Panorama to Default Settings’ as this may be the reason. Next check that the Panorama control surface is available in the Bitwig Settings/Controllers menu, when you click Add and select Nektar. If all is OK and Panorama is still not detected, restart your computer.
Make sure Logic is already installed on your computer. If not, install Logic first and open Logic at least countdown. once, before running the installer for Nektar DAW integration software. Make sure Logic is already installed on your computer. If not, install Logic first and open Logic at least once, before running the installer for Nektar DAW integration software.
First make sure Bitwig Studio is installed and launched at least once. • In the zip file you downloaded with this guide, locate the “Nektar” folder and move the ‘Nektar’ folder from the .zip file to the following directory: //home/Bitwig Studio/Controller Scripts/ •...
Toggles the arranger Overdub function on or off [Cycle] Switch the loop/cycle between the Left and Right locators on/off www.nektartech.com Using Nektar Panorama P-Series with Bitwig Studio [Rewind] Moves the Play Start Position backwards by 1 bar for each press [Forward]...
Page 8
Activate play from the Play Start Position. Press again to pause [Record] Activate record. Press again to deactivate record but continue pl [Record] Activate record. Press again to deactivate record but continue pl www.nektartech.com Using Panorama wi www.nektartech.com Using Panorama wi Using Nektar Panorama P-Series with Bitwig Studio www.nektartech.com...
Page 9
Using Panora recommend that you revisit this page once you are more familiar with how Panorama integrate with Bitwig Studio. You’ll most likely rediscover some of the features in a new light. www.nektartech.com Using Nektar Panorama P-Series with Bitwig Studio...
If you navigated to the Macros page, therefore press the [Mixer] button to go page. back to the mixer mode home page. Using Nektar Panorama P-Series with Bitwig Studio www.nektartech.com www.nektartech.com Using Panorama with Bitwig Studio 2.0 www.nektartech.com...
[Toggle/Mute] and move the Data Control to quickly scroll through the options. The display image shows you the location of the labels that tell you what the 8 encoders and 8 LED buttons are assigned to control. www.nektartech.com Using Nektar Panorama P-Series with Bitwig Studio...
Page 12
Right-click any parameter you want access and select “Map to controller or key” in the popup menu. In the Panorama [User] page, now turn one of the 2x4 encoders and the parameter will be assigned. All learned settings are saved with your Bitwig Studio project. Using Nektar Panorama P-Series with Bitwig Studio www.nektartech.com...
Page 13
(and solo) button. The [Fader] button turns the Write Arranger Automation function on and off. When this option is on, the ‘Write’ LED below the button will be lit. www.nektartech.com Using Nektar Panorama P-Series with Bitwig Studio...
[Patch+] to go to the next patch or [-Patch] to go to the previous patch. To scroll through quickly, press and hold one of the patch buttons and move the Data Control. Using Nektar Panorama P-Series with Bitwig Studio www.nektartech.com...
Page 15
“menu”. Press this button and use the [Data Control] to Selecting a track hosting Polysynth for example is a good place to start experiencing the power of Nektar mapping. scroll through the controller pages, each labeled clearly so you can find the section you want to control really quick.
Page 16
If you want to change a controls assignment, first delete the current assignment and then assign a new parameter. For more information about the Remote Controls Pages, check the Bitwig documentation. For more information about the Remote Controls Pages, check the Bitwig documentation. Using Nektar Panorama P-Series with Bitwig Studio www.nektartech.com...
In Bitwig Studio, right-click on the device panel, just below the device name. Select “Set as Primary Device” www.nektartech.com Using Nektar Panorama P-Series with Bitwig Studio You can now control that device directly from Panorama including changing it’s presets. Using Panorama with Bitwig Studio 2.0...
In Bitwig Studio, right-click on the device panel, just below the device name. • Select “Set as Primary Device” You can now control that device directly from Panorama including changing it’s presets. Using Nektar Panorama P-Series with Bitwig Studio www.nektartech.com...
[Shift]+[ [Shift]+[ Set Right loop point to the current song position Set Right loop point to the current song position www.nektartech.com Using Nektar Panorama P-Series with Bitwig Studio [Mode] [Mode] Toggle Overdub on/off Toggle Overdub on/off Using Panorama with Bitwig Studio 2.0 www.nektartech.com...
Select the clip you want to record on by hitting the corresponding pad. • Hit another pad to immediately start overdub recording another clip. When you are done, deactivate the “Overdub” menu. Using Nektar Panorama P-Series with Bitwig Studio www.nektartech.com...
Page 21
[Scenes] menu is active. As you move the Data Control you can scroll through pages each containing 12 scenes with the virtual pad display updating to show scene number and name (if applicable). www.nektartech.com Using Nektar Panorama P-Series with Bitwig Studio...
Stop playback of current clip [Shift] + [Play] Activate playback or record of current clip. If clip is already playing, this will activate stop at end of clip. [Shift] + [Record] Activate clip overdub Using Nektar Panorama P-Series with Bitwig Studio www.nektartech.com...
It will not change the note value for active notes. The same is true for velocity. It’s also important to note that each step of the sequence/Note clip can have more than one active note, so you can actually create polyphonic sequences directly from Panorama. www.nektartech.com Using Nektar Panorama P-Series with Bitwig Studio...
Page 24
To select a clip for step sequencing, simply click on a Note Clip in the Clip Launcher or the Arranger. You can also select clips by tapping the pads when Panorama’s Clip page is active in Mixer Mode. Using Nektar Panorama P-Series with Bitwig Studio www.nektartech.com...