Intellimute - Cobra XRS 9730 Operating Instructions Manual

Settings
Your Detector
Intro Operation Customer Warranty
Assistance

IntelliMute

in Icons
IntelliMute is a unique new feature that allows you to avoid alerts you
don't need to hear because you are stopped or moving slowly. By sensing
the "revs" (RPMs) of your engine, IntelliMute knows when you are at low
Secondary Icons
speed and automatically mutes alerts (except for strobe signals from
Intro Operation Customer Warranty
emergency vehicles).
Assistance
Before IntelliMute will work, you must set an activation point for your engine's
revs (see page 15). Whenever the revs are below that point, IntelliMute will
begin muting. The activation point will be stored in memory and recalled
Notice
condary Icons
each time the power is turned on. An i will appear in the display when
IntelliMute is on. The factory setting is IntelliMute off.
NOTE
IntelliMute may not work with some vehicles because it cannot sense
Notice
the engine's revs. In such cases, you can reduce unwanted audio alerts
by using Auto Mute and City mode when appropriate.
To Turn IntelliMute On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode, Tone Visual Display
go to IntelliMute.
Two beeps IntelliMute On,
then i appears
in the display
One beep IntelliMute Off
IntelliMute On IntelliMute Off
N W i h Intelli
Intelli Mute
Mute Off
On
14 English
Settings
Your Detector
Intro Operation Customer
Assistance
What to Remember While Using IntelliMute
IntelliMute works with all City and Auto Mute modes.
Whenever engine revs are below the activation point, an arrow
Main Icons
pointing down will appear in the display. Above the activation point,
Secondary Icons
an arrow pointing up will appear.
Below Activation Point
Main Icons
Intro Operation Customer Warranty
N W i h
Assistance
Notice
If, for any reason, the unit stops sensing your engine's revs,
Intro Operation IntelliMute will indicate an error and automatically turn off. Customer Warranty
Assistance
Secondary Icons
The rev point you set will be stored in the unit's memory when
power is turned off and recalled each time the power is turned on.
Secondary Icons NOTE
Main Icons
The rev point must be reset if you use your detector in a different vehicle.
Notice
NOTE
When initially choosing your IntelliMute activation point, a setting
Notice
Voice
Intro Operation Customer of approximately 300 to 600 RPMs above idle is recommended. Warranty
Assistance
You can reset the activation point at any time to fit your individual
IntelliMute On
preferences and driving style.
Customer
Installation
Setting the IntelliMute Activation Point
Assistance
IntelliMute Off
Secondary Icons Your detector must be installed in your vehicle.
CAUTION
Do not attempt to set the rev point while driving.
Notice Caution Warning
Your vehicle should be parked and idling.
IntelliMute must be turned on before setting the activation point.
Warranty
Above Activation Point
N W i h
Nothing Comes Close to a Cobra ® 15