Muting An Alert; Auto Mute Mode; Voice Alert And Tone Alert Modes; Notice - Cobra XRS 9730 Operating Instructions Manual

Settings
Your Detector
Intro Operation Customer Warranty
Assistance

Muting an Alert

Your detector allows you to quickly turn off an Audio Alert by momentarily
pressing the Program/Mute button. If you press the Program/Mute button
a second time during the Alert, the Audio Alert will be turned back on.
Secondary Icons
Program/Mute Button
Press and release

Notice

To Turn On or Off an Audio Alert Using the Program/Mute Button
Press and release Tone Visual Display
the Program/Mute
None None
button.

Auto Mute Mode

Auto Mute will automatically reduce the audio volume of all alerts after
four seconds for as long as the signal is detected. The factory setting
for Auto Mute is on.
To Turn Auto Mute On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
Tone Visual Display
go to Auto Mute.
Two beeps Auto Mute On
One beep Auto Mute Off
Auto Mute Off Auto Mute On
AutoMute On AutoMute Off
12 English

Voice Alert and Tone Alert Modes

You can set your detector to sound alerts and confirm user settings with
either a Voice or a Tone. The factory setting for Alert mode is Voice.
To Select Voice or Tone Mode Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to Voice/Tone.

Auxiliary Audio Jack

The Auxiliary Audio Jack can be used to connect an external speaker
in environments with high ambient noise levels. The internal speaker
will be disconnected.
Voice
Auto Mute On
Auto Mute Off
Tone Visual Display Voice
One beep Tone Tone Alert
Voice Alert Voice Voice Alert
Auxiliary
Audio Jack
Nothing Comes Close to a Cobra ® 13