Administration > Firmware Upgrade; System Status; System Status > System Status; System Status > Wireless Status - Linksys WET200 User Manual

Chapter 
Administration > Firmware Upgrade
Administration > Firmware Upgrade
This screen allows you to upgrade the Bridge's firmware
after you have downloaded a new firmware file from the
Linksys website. Firmware should only be upgraded if you
experience problems with the Bridge.
Enter the name of the firmware file or click Browse to
locate the file on your computer, then click Upgrade to
begin the upgrade.
Wireless-G Business Ethernet Bridge
Advanced Configuration

System Status

The System Status tab displays the Bridge's current status
and configuration information. These screens only display
information and cannot be used to change any settings.
System Status > System Status
This is the System Status tab's default screen. It displays
basic status information for the Bridge.
System Status > System Status
System Up Time
The Bridge's live time.
Firmware Version
The version number of the currently
installed firmware.
MAC Address
The MAC address currently assigned to the
Bridge.
LAN Settings The basic LAN settings.
IP Address, Subnet mask
•
subnet mask.
Gateway
The IP address of the Bridge's gateway.
•
Click Refresh to display the most current information.
System Status > Wireless Status
This screen displays status information for the Bridge's
wireless network.
System Status > Wireless Status
The Bridge's IP address and
0