Table of Contents
Advertisement
Chapter 3
Start to Traceroute
To run the test, click this button.
The Traceroute screen shows if the test is successful. Click
Close to return to the Diagnostics screen.
Diagnostics > Traceroute
Administration > Factory Defaults
Restore the Router to its factory default settings.
Administration > Factory Defaults
NOTE:
Do not restore the factory defaults unless
you are having difficulties with the Router and
have exhausted all other troubleshooting
measures. Once the Router is reset, you will have
to re-enter all of your configuration settings.
Factory Defaults
Restore All Settings
To reset the Router's settings to the
defaults, click this button and then follow the on-screen
instructions. Any custom settings you have saved will be
lost when the default settings are restored.
Wireless-G Home Router with SpeedBurst
Advanced Configuration
Administration > Firmware Upgrade
The Firmware Upgrade screen allows you to upgrade the
Router's firmware. Do not upgrade the firmware unless
you are experiencing problems with the Router or the new
firmware has a feature you want to use.
Administration > Firmware Upgrade
NOTE:
The Router may lose the settings you
have customized. Before you upgrade its
firmware, write down all of your custom settings.
After you upgrade its firmware, you may have to
re-enter all of your configuration settings.
Firmware Upgrade
Before upgrading the firmware, download the Router's
firmware upgrade file from the Linksys website,
www.linksysbycisco.com.
Please select a file to upgrade
upgrade file, click Browse and follow the on-screen
instructions.
Start to Upgrade
After you have selected the
appropriate file, click this button, and follow the on-screen
instructions.
WARNING:
The firmware upgrade must not
be interrupted; do not reboot or power off the
Router during the firmware upgrade.
To select the firmware
20
Hide quick links:
Advertisement
Table of Contents
