Linksys Wireless-B Quick Installation Manual

®
A Division of Cisco Systems, Inc.
Package Contents
• Wireless-B Ethernet Bridge
• Quick Installation Guide
• Setup CD-ROM
• User's Guide on CD
• Detachable Antenna
• Power Adapter
• Network Cable
• Registration Card
2.4
GHz
Wireless-B
802.11b
Ethernet Bridge
Wireless Quick Installation
Model No.
WET11
Model No.
Connecting the Wireless-B
1
Ethernet Bridge for Setup
A
Attach the Bridge's antenna.
B
Plug the included Ethernet
network cable into the LAN port
on the back panel of the
Bridge.
B
C
The X-II (MDI/MDI-X) slide switch
offers a choice between two
settings. Slide the X-II switch to
the X position if you are
connecting the Bridge to a
PC's network adapter. Slide the
X-II switch to the II position if
you are connecting the Bridge
to a hub or switch.
D
Plug the other end of the
Ethernet network cable into the
RJ-45 port of the hub, switch,
or PC you wish to use to
configure the Bridge.
E
Plug the supplied power
adapter into the Power port on
the back panel of the Bridge.
Then plug the other end into
E
an electrical outlet.
Setting up the Wireless-B
2
Ethernet Bridge
A
Insert the Setup CD-ROM into
your PC's CD-ROM drive. The
Setup Utility should run
automatically, and the
Welcome screen should
appear. If it does not appear,
click the Start button and
choose Run. In the field that
A
appears, enter D:\setup.exe (if
"D" is the letter of your CD-ROM
drive).
B
Click Setup to begin the setup
process.
C
Make sure the Bridge is
correctly connected to your
C
wired network. Click Next.
D
The screen displays a list of
Wireless-B Ethernet Bridges on
your network, along with their
status information. Select the
Bridge you are currently
installing by clicking its name in
the Selection box. Click Yes.
D
E
The Password screen will
appear. In lowercase letters,
enter admin in the Password
field. Then click Enter.
E