Trigger In Polarity Neg Pos; Trigger Key - Agilent Technologies ESG Series User And Programming Manual

ESG Family Signal Generators
Options UN8 and 202

Trigger In Polarity Neg Pos

Used this softkey to choose the polarity of the signal at the TRIGGER
IN BNC connector that triggers an event.
and
Default Value: Pos
Softkey Location:
Framed
Trigger

Trigger Key

Press this softkey to select the front panel
• Pattern trigger for a single output of a modulated data transmission
• Frame trigger to toggle between the primary and/or secondary
Once selected, you can trigger a single event at any time by pressing
the
NOTE Pattern Repeat and Pattern Trigger functions are not available if you
use either a PN data sequence, or an external data source.
Softkey Locations
Custom:
Trigger Key
Other Formats:
Pattern Repeat Single Cont
Or:
Frame Repeat Single Cont
Or:
Configure Timeslots
Trigger Key
Real-Time I/Q Baseband Generator User's and Programming Guide
refers to the falling edge.
Neg
Mode
>
Configure Timeslots
>
Trigger In Polarity Neg Pos
that is not framed. Trigger Key is displayed under the
softkey.
Trigger
framed data.
key.
Trigger
>
Mode Custom
>
Mode
> >
Mode TDMA desired format
> >
desired format
Mode TDMA
>
Configure Frame
Pos
> >
TDMA desired format
>
Configure Frame
Trigger
>
Pattern Repeat Single
>
TDMA desired format
> >
Pattern Trigger
>
Data Format Pattern Framed
> >
Frame Trigger Trigger Key
>
Data Format Pattern Framed
>
Secondary Frame Trigger
Softkey Reference
refers to the rising edge
>
Data Format Pattern
>
Secondary Frame
key as the:
Pattern
> >
Pattern Trigger
>
Trigger Key
>
>
>
T
3-163