Administration > Management; Ap Password; Web Access; Snmp - Linksys WAP200E User Manual

Chapter 
Wreless Brdge This mode connects physically separated
wired networks using multiple access points. Wireless
clients will not be able to connect to the access point in
this mode. Enter the MAC address(es) of the access point(s)
that will bridge to this access point.
Wired LAN
Switch
Access Point
- Wireless
Bridge Mode
Access Point
- Wireless
Bridge Mode
Access Point
- Wireless
Bridge Mode
Switch
Wired LAN
Wireless Bridge Mode
Wreless-G Exteror Access Pont wth Power Over Ethernet
Wired LAN
Switch
Access Point
- Wireless
Bridge Mode
Access Point
- Wireless
Bridge Mode
Switch
Wired LAN
Advanced Configuration
Administration > Management
On this screen you can configure the password, Web
Access, and SNMP settings.
Administration > Management

AP Password

You should change the username/password that controls
access to the Access Point's web-based utility.
Local AP Password
User Name Modify the administrator username. The
default is admin.
AP Password Modify the administrator password for the
Access Point's web-based utility. The default is admin.
Re-enter to confrm To confirm the new Password, enter
it again in this field.

Web Access

To increase the security on accessing web-based utility.
You can enable HTTPS. Once enabled, users need to use
https:// when accessing the web-based utility.
Web HTTPS Access Use secured HTTP session to access
Web based Utility. The default is Dsabled.
Wreless Web Access Allow or deny wireless clients to
access Web based Utility. The default is Enabled.

SNMP

SNMP is a popular network monitoring and management
protocol. It provides network administrators with the
ability to monitor the status of the Access Point and
9