Table of Contents
Advertisement
Chapter 2
UNPACK AND INSPECT
Carefully inspect the Modem-16 Module for shipping damages. If damage is sus-
pected, file a claim immediately with the carrier and then contact ADTRAN Tech-
nical Support. If possible, keep the original shipping container for use in
returning the Modem-16 Module for repair or for verification of shipping dam-
age.
Contents of ADTRAN Shipment
The following items are included in the ADTRAN shipment:
•
•
INSTALLING THE MODEM-16 MODULE
The installation procedure is described below, and Figure 2-1 shows the proper
placement of the option module.
1.
2.
3.
4.
61200181L1-1
Modem-16 Module
Modem-16 Module User Manual (insert into main ATLAS User Manual)
Remove the cover plate (corresponding to the slot in which the Modem-16
Module will be installed) from the ATLAS chassis rear panel.
Slide the Modem-16 Module into the ATLAS chassis until the module is posi-
tioned firmly against the front of the ATLAS unit.
Fasten the thumbscrews at both edges of the option module.
Complete installation of remaining modules and Base Unit as specified in the
Installation chapter of the ATLAS User Manual.
Figure 2-1. Installing the Modem-16 Module
Modem-16 Module User Manual
Installation
2-1
Advertisement
Table of Contents
